Lucent Technologies Release 6 manual Set Country Options

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998

3Install Management Terminal and Activate System

Set Country Options Page 3-12

Set Country Options

Certain country options need to be set to turn red failure indication LEDs off.

1.Verify the screen displays: Command:

2.Type change system-parameters country options and press Enter.

A screen similar to Screen 3-2 is displayed on the terminal. The cursor is set on the Companding Mode line.

Screen 3-2. Typical System Parameters Country-Options Screen

3.The default companding mode is μ-Law. If the country uses A-Lawcompanding, type A-Law.

4.Press Enter when this information is correct.

Other items eventually need to be entered on this screen, but this is all that must be done to turn the red alarm LEDs off. Refer to Table 3-1 for a list of the country codes.