Lucent Technologies Release 6 manual Install Management Terminal Activate System

DEFINITY Enterprise Communications Server Release 6			Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112			May 1998
Contents
			Page iv
	■	Install Equipment and Cables	2-6
	■	Install Cable Slack Managers	2-12
	■	Install Sneak Fuse Panels	2-13
	■	Cable Installation	2-16
	■	Install Coupled Bonding Conductor	2-26
	■	Station Wiring Design	2-28
	■	Station Circuit Distribution from Equipment Room	2-33
	■	Layout	2-39
	■	Voice and Data Terminals	2-40
	■	Label the Main Distribution Frame	2-44
	■	Patch Cord/Jumper Installation and Administration	2-45
	■	Create a Provisioning Plan	2-49

3Install Management Terminal and

	Activate System			3-1
		■	Install Management Terminal	3-2
		■	Activate the System	3-7
		■	Screens and Commands	3-10
		■	System Administration	3-11
		■	Set Country Options	3-12
		■	Circuit Pack Administration	3-17
		■	Set System Maintenance Parameters	3-18
		■	Administer System Configurations (Release 6r)	3-19
		■	Administer Fiber Links (Release 6r Only)	3-23
		■	Reboot High Reliability System	3-29
		■	Administer Attendant Console	3-29
		■	Save Translations	3-30
		■	Add Translations	3-30
		■	Installation Completion	3-31
		■	DEFINITY AUDIX Power Procedures	3-32
4	Test the System			4-1
		■	Check System Status for Each Cabinet	4-2
		■	Check Circuit Pack Configuration	4-3
		■	Test TDM Bus in PPN	4-4
		■	Test Tone-Clock Circuit Packs	4-5
		■	Test SPE Duplication Memory Shadowing Link	4-6