Lucent Technologies Release 6 manual Lightguide Distribution Shelf, Figure Notes

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998
A Connecting Fiber Optic Cables
Optical Cross-Connect Hardware	Page A-9

Lightguide Distribution Shelf

The preterminated lightguide distribution shelf can mount to LGX®fiber optic distribution frames or can mount directly to a wall. The shelf can also mount in 23-inch (58.4 cm) or 19-inch (48.2 cm) equipment cabinets or racks. The shelf accommodates single-mode and/or multi-mode fiber connections. See Figure A-3.

Figure Notes:
1.	To PPN or Remote EPN Cabinet	3.	Circuit Labels
2.	Retainer Rings	4.	From Outside Cable Plant

Figure A-3. Typical Preterminated Lightguide Distribution Shelf

NOTE:

If you are not viewing this book on CD-ROM, Figure A-3 shows orange fiber connections, denoting multi-mode fiber.