Lucent Technologies Release 6 manual Install and Connect Cabinets, Unpack and Inspect Cabinets

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998
1 Install and Connect Cabinets
Unpack and Inspect Cabinets	Page 1-1
1

Install and Connect Cabinets 1

This chapter discusses installation of Multi-Carrier Cabinets only. For information on Single-Carrier Cabinets, refer to DEFINITY Enterprise Communications Server Release 5 Installation and Test for Single-Carrier Cabinets.

Floor plans and equipment layouts for typical system installations are provided in DEFINITY Enterprise Communications Server Release 6 System Description Pocket Reference.

Unpack and Inspect Cabinets

Perform these steps for all cabinets.

! DANGER:

A cabinet may weigh as much as 800 lbs (363 kg) and may be top heavy.

Use extreme caution.

1.Check the status of the SHOCKWATCH and/or TILTWATCH indicators on the container. If the container has been shaken or tilted beyond specifications, the indicators are red, indicating potential damage. Report any damage according to local shipping instructions.

! DANGER:

Take care to avoid injury while cutting and removing the 2 metal bands.

2.Unpack the cabinet and remove all packing material.

3.Move the cabinets into their proper positions.

4.Do not adjust the leveling feet at this time.