Lucent Technologies manual Administer System Configurations Release 6r, Change Customer Options

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998

3Install Management Terminal and Activate System

Administer System Configurations (Release 6r) Page 3-19

Administer System Configurations (Release 6r)

If a Release 6si is installed, skip to ‘‘Administer Attendant Console’’ on page 3-29.

Change Customer Options

The following features are part of the basic software package and do not need to be activated. They default to y (yes) on the Optional Features Form.

■Automatic Route Selection/Automatic Alternate Routing Partitioning

■Emergency Access to the Attendant

■Hospitality

■Service Observing

An “init” password is required to modify customer options. Contact your regional

CSA for the password.

Use the following procedure to change the customer’s optional features.

1.At the Command: prompt, enter the change system-parameterscustomer-optionscommand. A display similar to Screen 3-6 appears.