Lucent Technologies Release 6 manual Install I/O Cable Rack Riser

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998
C Cable Ductwork
	Page C-16

Install I/O Cable Rack Riser

Refer to Figure C-11 and assemble the ductwork:

1.Attach angle bracket (group 9) to I/O trough using thread-forming screws.

2.Attach cross-aisle bracket to angle bracket using thread-forming screws. Attach the angle bracket to the 6-hole face of the cross-aisle bracket using three thread-forming screws through the bottom holes.

3.Attach I/O coupling trough (group 8) to cross-aisle bracket using thread-forming screws.

4.Attach cable rack to coupling trough using locally-provided coupling plates and 3/8-18 x 1/2 inch hex bolts and nuts.

5.Attach other end of cable rack to wall using locally provided hardware suitable to type of wall.

duct7 KLC 071796

Figure Notes
1.	I/O Trough	5.	I/O Coupling Trough
2.	Angle Bracket	6.	Cross-Aisle Bracket
3.	Coupling Plate	7.	Front of Cabinet
4.	Cable Rack

Figure C-11. Installation of I/O Cable Rack Riser to End of Cabinet (Group 9)