Lucent Technologies Release 6 manual Assign ISDN-PRI and PRI Over Paccon Options

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998

5Install and Wire Telephones and Other Equipment

Add PRI Over PACCON to R6si Page 5-127

Enter Added Translations

1.Log in as craft. For a system where ISDN-PRI interfaces were previously controlled by a TN765 PI circuit pack, preliminary administration must first remove any:

■Existing PI-controlled ISDN-PRI links

■TN767C DS1 Interface circuit packs used to provide D-channel signaling for ISDN-PRI links

The preliminary administration includes:

2.Remove the existing PI-controlled ISDN-PRI link translations

■busyout link <n> — For each PRI link assigned

■change trunk < nn> — To not reference the signaling groups associated with each trunk’s B channel

■remove signaling-group < nn> — For each signaling group assigned

■change communications link — To set the “ Enable” field to n for each link of type “ISDN”

■change communications processor-channel — To clear all fields for each processor channel of type “ISDN”

■change communications link — To vacate all fields for each link of type “ISDN”

3.For each TN767C previously used to provide D-channel signaling for ISDN-PRI, remove its existing DS1 translations, and reassign circuit pack as a TN464

Assign ISDN-PRI and PRI Over PACCON

Options

1.If ISDN-PRI is being assigned as a new feature on the system, get the DOSS order number of the ISDN-PRI addition.

2.Call the regional CSA to request an “init” login. The CSA should enter change system-parameterscustomer-optionsand press Enter to enable the “ISDN-PRI” (if necessary) and the “PRI Over PACCON” option. For details on enabling this option, see DEFINITY Enterprise Communications Server Release 6 Administration and Feature Description.

Assign or Reassign ISDN-PRI Feature

1.Assign or reassign ISDN-PRI using the forms listed under “Integrated Services Digital Network — Primary Rate Interface” in DEFINITY Enterprise Communications Server Release 6 Administration and Feature Description.