Lucent Technologies Release 6 manual System Administration, Log in to the System

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998

3Install Management Terminal and Activate System

System Administration Page 3-11

System Administration

NOTE:

An “init” login is required to perform the following. Contact the regional CSA (Customer Software Associate) to assign the Offer Category option. Maintenance capabilities to initialize the system and access to either an internal or external modem are the only command options available until the Offer Category option is set.

Log in to the System

1.Verify the screen displays: Login:

2.Type craft and press Enter.

3.Verify the screen displays: password:

4.Type crftpw and press Enter. For security reasons, the password does not display as it is typed. The system verifies a valid login and password name were entered. If an invalid login or password name was entered, the screen displays:

login incorrect:

In this case, repeat the procedure using the correct login and matching password.

If the system recognizes the login and password name, the screen displays the software version.

5.Verify the screen display is similar to:

Terminal Type (513, 715, 4410, 4425, VT220): [513]

6.Type the number of the management terminal and press Enter.

7.Verify the screen displays: Command:

NOTE:

The following sections describe some of the procedures used to access and change certain options. These sections are not intended to replace or modify the instructions provided in DEFINITY Enterprise Communications Server Release 6 Administration and Feature Description.