Lucent Technologies Release 6 manual Country Codes, Usa

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998

3Install Management Terminal and Activate System

Set Country Options Page 3-13

Table 3-1. Country Codes

Country	Code	Country	Code
USA	1	France	12
Australia	2	Germany	13
Japan	3	Czechoslovakia	14
Italy	4	Russia	15
The Netherlands	5	Argentina	16
Singapore	6	Greece	17
Mexico	7	China	18
Belgium	8	Hong Kong	19
Saudi Arabia	9	Thailand	20
United Kingdom	10	Macedonia	21
Spain	11

5.If all red LEDs do not go off, reseat (unplug and reinsert) any purple-labeled circuit packs displaying red LEDs.

! CAUTION:

To avoid a disk crash, never reset the DEFINITY AUDIX System without first shutting it down. Shut down the DEFINITY AUDIX System (and allow the disk to completely spin down) before unplugging the

assembly. See ‘DEFINITY‘ AUDIX Power Procedures’’ on page 3-32 for the proper procedures.

6.If the red LEDs still do not go off, refer to DEFINITY Enterprise Communications Server Release 6 Maintenance for R6r, or to DEFINITY Enterprise Communications Server Release 6 Maintenance for R6vs/si.

NOTE:

Ignore the red alarm indication LED on the TN767 or TN464 DS1 circuit pack until after the DS1 circuit pack is administered. Alarms will appear in the Alarm Log when power is applied to the system before all equipment connecting to port circuit packs is installed. Normally, some alarms will be logged when power is applied to the system, but should be resolved quickly. If no equipment is connected to the port circuit packs, alarms associated with these ports can take up to four hours to log, but will clear automatically after all equipment is installed and operating correctly.