Lucent Technologies Release 6 manual Example Adjunct Power Connections

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998

5Install and Wire Telephones and Other Equipment

Adjunct Power Connections Page 5-14

Adjunct Power Connections

Figure 5-9 shows 3 typical connection locations for adjunct power. Adjunct power for station equipment may be supplied from the equipment room, satellite location, or the work location.

4

			adjunct_1 PDH 062696
Figure Notes
1.	Typical Display Telephone	9.	100P6A Patch Cord or Jumpers
2.	Adjunct Power Supply (Such as 1151A or	10.	System Side of MDF
	1151A2)	11.	25-Pair Cable to System Cabinet
3.	400B2 Adapter		Analog Line Circuit Pack
4.	Information Outlet	12.	Equipment Room
5.	4-Pair D-Inside Wire (DIW) Cable	13.	Satellite Location
6.	Satellite Site or Adapter Location	14.	Work Location
7.	25-Pair D-Inside Wire (DIW) Cable	15.	Power From Bulk Power Source (Such
8.	Station Side of Main Distribution Frame		as 1145B)

Figure 5-9. Example Adjunct Power Connections

For Figure 5-9, the following example is used:

a.If 25 telephones connect to the system and all 25 telephones need adjunct power, install the adjunct power supply in the equipment room.

b. If only 10 of the telephones need adjunct power, install the adjunct power supply at the satellite location.

c. If only 1 telephone needs adjunct power, install the adjunct power supply at the work location.