Lucent Technologies Release 6 manual Hardware Setup, Administration Setup

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998

5Install and Wire Telephones and Other Equipment

CAMA/E911 Installation Page 5-134

Table 5-24.Compatibility Tone Clock, TTR/CPTR, and GPTR Circuit Packs

—Continued

		Compatibility
		with CAMA
Circuit		Trunks in
Pack	Description	Same PN	Application	Notes
TN780	Tone Clock	Not Affected	Used in the	Tone clock only,
			U.S. (infre-	no TTR/CPTR
			quently) for	functionality. Typ-
			stratum 3 clock-	ically found with
			ing and used in	TN748 circuit
			many other	packs in the U.S.
			countries	Use TN7744DV2
				instead of TN748
				with CAMA.
TN2182	Tone Clock /	Compatible	Used globally	Tone clock plus 8
TN2182B	Call Classifier -			GPTR/call classi-
	Detector			fication ports. Use
				TN2182B if
				CAMA feature is
				to be supported.

Continued on next page

Hardware Setup

1.Insert the TN429C CO circuit pack in any available port slot.

2.Wire the TN429C to the MDF (the trunk from the CO). Refer to the pinouts in Table 5-34.

Administration Setup

1. At the prompt, type add trunk next and press Enter.