Lucent Technologies Release 6 manual Install I/O Cable Rack Coupling

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998
C Cable Ductwork
	Page C-15

Install I/O Cable Rack Coupling

1.Attach I/O trough to top of cabinet using thread-forming screws. See Figure C-10.

2.Attach cross-aisle bracket to I/O trough using thread-forming screws through the top three holes on the bracket’s 6-hole face.

3.Attach I/O coupling trough to cross-aisle bracket using thread-forming screws.

4.Attach cable rack to coupling trough using locally-provided coupling plates and 3/8-18 x 1/2 inch hex head bolts with nuts.

5.Attach other end of cable rack to wall using locally-provided hardware.

			duct6 KLC 071796
Figure Notes
1.	Cross-Aisle Bracket	5.	I/O Trough
2.	Coupling Plate	6.	Use Only When Required
3.	Cable Rack	7.	To Wall
4.	I/O Coupling Trough

Figure C-10. Installation of I/O Cable Rack Coupling to Rear of Cabinet