Lucent Technologies Release 6 manual Test Terminating Trunk Transmission

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998

6Test Telephones and Other Equipment

Test Terminating Trunk Transmission Page 6-6

Test Terminating Trunk Transmission

The Terminating Trunk Transmission Test provides for extension number access to 3 tone sequences that can be used for trunk transmission testing from the distant end of the trunks.

The 3 test types must have extension numbers assigned on the system-parameters maintenance form:

Test Type 100:_______ Test Type 102:_______ Test Type 105:_______

Test type 100 provides:

■5.5 Seconds of 1004 Hz tone at 0 dB

■Quiet until disconnect; disconnect is forced after 1 minute

Test Type 102 provides:

■9 Seconds of 1004 Hz tone at 0 dB

■1 Second of silence

■Cycle is repeated until disconnect, which is forced after 24 hours

Test Type 105 provides:

■9 Seconds of 1004 Hz tone at -16 dB

■1 Second of silence

■9 Seconds of 404 Hz tone at -16 dB

■1 Second of silence

■9 Seconds of 2804 Hz tone at -16 dB

■30 Seconds of silence

■0.5 Seconds of test progress tone (2225 Hz)

■Approximately 5 seconds of silence

■Forced disconnect