Lucent Technologies Release 6 manual Test the System

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998

4 Test the System

Page 4-1

4 Test the System 4

The following tests provide verification of the TDM bus cables and terminators, and fiber optic inter-cabinet cables. If a FAIL result code is seen or other problems are indicated, check these cables. If problems continue, refer to DEFINITY Enterprise Communications Server Release 6 Maintenance for R6r or DEFINITY Enterprise Communications Server Release 6 Maintenance for R6vs/si.

NOTE:

Refer to ‘‘LED Indicators’’ on page 4-13 for information regarding the LED status indicators for the different circuit packs.

1.The status of the system should be reviewed first.

2.Test the tone-clock, TDM bus, and duplication link in the PPN.

3.Test the Switch Node carrier (Release 6r only).

4.Test Expansion Interface circuit packs, tone-clock circuit packs, TDM buses, and duplication in the EPNs.

Circuit pack positions are usually given by cabinet, carrier, and slot. They may also be given by port.

The term “ cabinet” refers to 1 Multi-Carrier Cabinet making up 1 port network. A port network is defined as a group of cabinets connected together with one TDM bus.