Lucent Technologies Release 6 manual Figure C-4. Assembly of Intercabinet Shielded Ducts

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998
C Cable Ductwork
	Page C-8

ductcip KLC 071796

Figure Notes
1. A	4. D
2. B	5. E
3. C

Figure C-4. Assembly of Intercabinet Shielded Ducts

4.Install risers on any other cabinets that require shielded-duct connections.

5.Set a shielded trough ("B") between two cabinet risers (“A”). Push down on the trough so the slots in the ends of the trough engage the ears at the corners of the risers. The walls of the trough go inside the walls of the risers and outside of the ears of the risers.

6.Seat the bottom of the shielded trough on the support walls of the two cabinet risers that it connects. Attach the trough to each riser with a self-tapping screw.

7.Install shielded troughs on any other pairs of cabinets that require shielded-duct connections.