Lucent Technologies Release 6 manual Add ISDN-BRI, Service Interruption

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998

5Install and Wire Telephones and Other Equipment

Add ISDN—BRI Page 5-121

Add ISDN—BRI

Service Interruption

1.Since, if the packet bus is being added, the addition of ISDN—BRI requires a service interruption, notify the customer in advance as to when the addition will take place.

Disable Alarm Origination

1.Enter change system-parameters maintenance and press Enter.

2.Set the Alarm Origination Activated field to n.

! CAUTION:

If you do not disable Alarm Origination, the system may generate alarms, resulting in unnecessary trouble tickets.

3.For some releases of system software, disable Cleared Alarm Notification and Restart Notification before submitting the form.

Save Translations

1.If the system is high or critical reliability, enter status system 1 and press Enter to verify that the system is in the “active/standby” mode.

2.Enter save translation and press Enter. This instructs the system to take all translation information in memory and write it to the translation card or tape.

3.If the system contains a TN750 Announcement circuit pack, enter display announcements and press Enter.

If administered recorded announcements are listed, enter list configuration software-versionand press Enter. Check Page 2 of this form to see when the announcements were last saved. To save the announcements, enter save announcements and press Enter.

Power Down System

1. If the packet bus is being added, set the main circuit breaker to OFF.