Lucent Technologies Release 6 manual Attach the Cable to the Pass-Thru Tool

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998

5Install and Wire Telephones and Other Equipment

Add External Modem to TN1648B Page 5-102

4.Connect the external modem cable to the cable assembly.

5.Attach the RJ (telephone plug) to the pass-thru tool using a tie wrap. See Figure 5-49.

3

2

3

		1
		fodacup3 RPY 021698
Figure Notes
1.	Pass-thru Tool	3. Tie Wrap
2.	RJ45 (Telephone Plug)

Figure 5-49. Attach the Cable to the Pass-Thru Tool

6.Slide the tool to the front of the cabinet. See Figure 5-50.

7.Pull the tool (with adapter and cable attached) out through the front of the cabinet.

8.Close the rear door.

9.Replace the fan cover. See Figure 5-51.