Lucent Technologies Release 6 manual Screen 5-6. Route Pattern form, Enter

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998

5Install and Wire Telephones and Other Equipment

CAMA/E911 Installation Page 5-139

24. At the prompt, type change route-pattern<number> (the route pattern to be changed; in the example above, the route pattern is 11) and press

Enter.

									Page 1 of X
						Pattern Number: 11
Grp.	FRL NPA		Pfx Hop		Toll No. Del			Inserted		IXC
No.			Mrk Lmt		List Digits			Digits
1: 1__	0	___	_	__	__	__		____________________________________ user
2: ___	_	___	_	__	__	__		____________________________________ user
3: ___	_	___	_	__	__	__		____________________________________ user
4: ___	_	___	_	__	__	__		____________________________________ user
5: ___	_	___	_	__	__	__		____________________________________ user
6: ___	_	___	_	__	__	__		____________________________________ user
BCC	VALUE		TSC	CA-TSC		ITC	BCIE Service/Feature		Numbering	LAR
0 1	2 3	4 W		Request					Format
1: y y y y y n			y none_____			both	ept	outwats-bnd____ BAND: ___ ________		none
2: y y y y y n			n			rest		_______________	________	next
3: y y y y y n			n			rest		_______________	________	rehu
4: y y y y y n			n			rest		_______________	________	none
5: y y y y y n			n			rest		_______________	________	none
6: y y y y y n			n			rest		_______________	________	none

Screen 5-6. Route Pattern form (Page 1)

25.On the Route Pattern screen, in Grp. No. field, enter the CAMA trunk group number.

26.In the FRL field, enter 0.

NOTE:

For the following step, if the Central Office (CO) wants KP11ST as the dialed digit string, then leave blank. If the CO wants KP911ST, then insert a “9” in the Inserted Digits field.

27.Administer the Inserted Digits field if needed and press Enter.

28. At the prompt, type be changed; in the Enter.

change route-pattern <number> (the route pattern to example above, the route pattern is 12) and press