Lucent Technologies Release 6 manual Test External Ringing, Test Queue Warning Indicator

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998

6Test Telephones and Other Equipment

Test External Ringing Page 6-3

Test External Ringing

Make a test call to the attendant console to verify ringing device sounds when the Night lamp on console is lighted. If ringing device has not been installed by customer, connect spare telephone to information outlet reserved for ringing device and make test call.

Test Queue Warning Indicator

Make a test call to an extension associated with a Uniform Call Distribution (UCD) or Direct Department Calling (DDC) group, and verify the queue warning indicator lamp lights. If the queue warning indicator has not been installed by customer, connect a spare telephone to the information outlet reserved for queue warning indicator and make a test call.

Test Integrated Announcement

The TN750/B/C Announcement circuit pack provides the ability to store messages. The messages can be recorded from telephones on- or off-premises and have flexible message lengths. The telephone selected as the test telephone must have a class of service (COS) with console permission enabled.

Record Announcement

1.Select test telephone with console permission enabled.

2.Dial the access code followed by the integrated announcement extension number. Dial tone is heard.

3.Dial “1.” A short burst of tone is heard and recording begins. Speak the announcement into the telephone.

4.Dial “#” or hang up. Recording stops and dial tone is heard.

Playback Announcement

1.Dial access code followed by the integrated announcement extension number. Dial tone is heard.

2.Dial “2.” The announcement is heard and dial tone is heard at completion of announcement.

Delete Announcement

1.Dial access code followed by the integrated announcement extension number. Dial tone is heard.

2.Dial “3.” A confirmation tone is heard and announcement is deleted.