Lucent Technologies Release 6 Printer Option Settings, Figure B-1. Control Panel for 572 Printer

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998
B Option Switch Settings
Printer Option Settings	Page B-5

Printer Option Settings

Printers can be used with a management terminal as journal printers for the hospitality feature and also as an output device for Call Detail Recording (CDR).

A 572 printer can function as a CDR device, system printer, or journal printer. The options are set with function keys rather than DIP switches. Figure B-1 shows the arrangement of the function keys on the printer control panel.

	Power Alarm		Print		On		Line	Form
	On	Quality			Line		Feed	Feed
							r781610 RBP 071096
Figure Notes
1.	Power On Button			4.		On Line Button
2.	Alarm Button			5.		Line Feed Button
3.	Print Quality Button			6.		Form Feed Button

Figure B-1. Control Panel for 572 Printer

1.Load the printer with paper and turn the power off (Callout 1).

2.Simultaneously press and hold the Print Quality and On Line buttons.

3.Press the Power On button. Release all three buttons. The printer is now in set-up mode and it prints the following settings:

Form length	Buzzer on/off
Lines per inch	Letter quality or near letter quality
Characters per inch

If the printer is used with a management terminal, CDR, or as a Journal printer, set the options as shown in Table B-2. If the printer is used as the system printer, set the options as shown in Table B-3 on page B-7.

4.Use Line Feed to step forward through the list of functions or use Form Feed to step backward.

5.Press On Line. This activates the menu for the function. Use Line Feed and Form Feed to step through the options for the function.

6.When a desired option is located, press Print Quality. Each time an option is set, the setting is printed. Repeat Step 4 for each option to be set.

7.When finished, press Print Quality. The printer changes to normal mode.