Lucent Technologies Release 6 manual 1151A Power Supply, Important Safety Instructions

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998

5Install and Wire Telephones and Other Equipment

1151A Power Supply Page 5-54

1151A Power Supply

The 1151A and 1151A2 Power Supplies comply with the UL Standard UL 1459, second edition. Safety instructions follow the table of certifications.

Complies	UL 1459
Certified	CSA 22.2
Approved	EN6950
Approved	CE

Important Safety Instructions

Please read the following helpful tips. Retain these tips for later use.

When using this power supply, the following safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons.

■Read and understand all instructions.

■Follow all warnings and instructions marked on this power supply.

■This product can be hazardous if immersed in water. To avoid the possibility of electrical shock, do not use it near water.

■To reduce the risk of electric shock, do not disassemble this product except to replace battery.

■This product should be operated only from the type of AC power source indicated on the label. If you are not sure of the type of AC power being provided, contact a qualified service person.

■Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by persons walking on it.

■Do not overload wall outlets and extension cords as this can result in the risk of line or electric shock.

■Disconnect the cords on this product and refer servicing to qualified service personnel under the following conditions:

—When the power supply cord or plug is damaged or frayed.

—If liquid has been spilled into the product.

—If the product has been exposed to rain or water.

—If the product was dropped or the housing has been damaged.

—If the product exhibits a distinct change in performance.

—If the product does not operate normally by following the operating instructions.