Lucent Technologies Release 6 manual Install the Pass-thru Kit, Remove the Fan Cover

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998

5Install and Wire Telephones and Other Equipment

Add the Fiber Optic Cable Page 5-76

lcda3fop RPY 021198

Figure 5-32. Remove the Fan Cover

Install the Pass-thru Kit

1.Snap the SC-SC fiber optic adapter on the pass-thru tool. See Figure 5-33. Use the beige adapter even if single-mode fiber is being installed. The SC-SC adapter is better suited for cable routing in the next steps.

NOTE:

If single-mode fiber is being installed, the beige adapter will be replaced with a blue adapter, later in this section.