Lucent Technologies Release 6 manual Cable Disconnect Label

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998

5Install and Wire Telephones and Other Equipment

Add the Fiber Optic Cable Page 5-81

1

prda0001 RPY 021898

Figure Notes

1. To outside plant fiber

Figure 5-37. Cable Disconnect Label

11. Close the rear door.

! CAUTION:

Avoid bending fiber optic cables to a radius smaller than 1.5 inches (3.8 cm), to prevent mechanical stress on the cables. Plan the use of cable ties to avoid crimping the cable or creating a fixed stress point where, at a later time, movement of the cable causes it to exceed the minimum bend radius.

! CAUTION:

Be careful not to crimp the fiber cable when you are performing the following step.

12. Replace the fan cover. See Figure 5-38.