Lucent Technologies Release 6 manual Analog Tie Trunk Example, Analog Tie Trunk Wiring

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998

5Install and Wire Telephones and Other Equipment

Analog Tie Trunk Example Page 5-6

Analog Tie Trunk Example

This example shows how to connect analog tie trunk wiring from one DEFINITY

System to another DEFINITY System.

T.1	26	29		T.2
R.1	1	4		R.2
T1.1	27		30	T1.2
R1.1	2	5		R1.2
E.1 28		31		E.2
M.1	3	6		M.2
		tie_wire RBP 071796

Figure Notes

1. External Trunk or Adapter 2. TN760 Tie Trunk Circuit Pack (Position 1C05)

Figure 5-5. Analog Tie Trunk Wiring

1.Set the option switches on the port circuit pack (TN760) as described in

Appendix B, ‘Option‘ Switch Settings’’.

2.Install cross-connect jumpers to connect the named pins from the tie trunk circuit pack to the appropriate leads on the external tie trunk. Names of the tie trunk leads must be determined from the manufacturer or supplier of the external trunk circuit. The example in Figure 5-5 shows a DEFINITY System tie trunk connected to a DEFINITY System tie trunk.

3.Administer on the Trunk Group screen of the management terminal. See DEFINITY Enterprise Communications Server Release 6 Administration and Feature Description for more details.