Lucent Technologies Release 6 manual Add Tie Trunks

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998

5Install and Wire Telephones and Other Equipment

Add Tie Trunks Page 5-87

Add Tie Trunks

Requirements

Each tie trunk connects to 1 port of a 4-port TN760 or to an assortment of non-United States tie trunk circuit packs.

Installation

1. Determine the port assignment of the trunk from Trunk Group form.

Port Number	3	A	02	01
	Cabinet	Carrier	Slot	Circuit
	(Port Network)	(or Single-Carrier
		Cabinet)

2.Install a TN760 or a non-United States tie trunk circuit pack in the assigned carrier slot (if an additional circuit pack is required).

3.For customer-owned (not leased) tie-trunk facilities (such as campus environments), TN760 circuit packs provide signaling capabilities beyond those specified by the industry-wide E & M standard. Use Figure 5-41 and Table 5-18 to choose the preferred signaling format, set switches on the TN760 circuit pack, and administer the port.

4.Administer forms listed under “Tie Trunk Group” in DEFINITY Enterprise Communications Server Release 6 Administration and Feature Description.