Lucent Technologies Release 6 manual Call Detail Recording Option Settings

DEFINITY Enterprise Communications Server Release 6	Issue 5
Installation and Test for Multi-Carrier Cabinets 555-230-112	May 1998
B Option Switch Settings
Call Detail Recording Option Settings	Page B-8

Call Detail Recording Option Settings

The interface between the system and CDR equipment may be 1 of the following:

■Data Module — recommended option settings are shown in Table B-3.

■Modem — recommended option settings are in modem vendor document

■TN726 Data Line circuit pack and an Asynchronous Data Unit — data modules or modems are not required.

■Connected directly to the DCE connector (EIA Port) located on the rear of the Control Carrier — data modules or modems are not required.

A 572 Printer can be used as an output receiving device for CDR. The recommended option settings for this printer is shown in Table B-4. Also, a TELESEER, CDR, 94A Local Storage Unit (LSU), or Customer Premises Equipment (CPE) can be used as the output receiving device.

Administration procedures for CDR equipment are provided in DEFINITY

Enterprise Communications Server Release 6 Administration and Feature

Description.

Table B-4. 572 Printer Used with Management Terminal, CDR, or Journal Printer

	Function	Function Name	Menu	Menu Status
01		FORM LENGTH	09	11
02		LPI	01	6
03		CPI	01	10
04		LQ or NLQ	01	LQ
05		BUZZER	01	ON
06		FONT	02	FONTCART
07		RESOLUTION	01	144
11		BUFFER	02	N-LINE
13		PW ON MODE	01	ON-LINE
14		DIRECTION	01	B1-DIR.1
15		BUFF FULL	02	LF + CR
16		P.E.	01	ACTIVE
17		AUTO CARRIAGE RETURN (CR)	01	CR + LF
18		ZERO	01	0
22		AUTO LINE FEED	01	CR ONLY

Continued on next page