Technical specifications | VTech CS2111-11, CS2112 specs

Technical specifications

Frequency control	Crystal controlled PLL synthesizer

Transmit frequency	Handset: 912.75-917.10 MHz
	Telephone base: 2410.20-2418.90MHz

Receive frequency	Handset: 2410.20-2418.90 MHz
	Telephone base: 912.75-917.10MHz

Channels	30

Nominal effective range	Maximum power allowed by FCC and IC. Actual operating range may vary according to
	environmental conditions at the time of use.
Size	Handset: 7.25in X 2.04in X 1.48in (184.1mm X 51.8mm X 37.5mm)
	Telephone base: 4.34in X 3.37in X 4.82in (110.2mm X 85.5mm X 122.4mm)

Weight	Handset: 5.36oz (151.9 grams) (including battery)
	Telephone base: 4.24oz (120.2 grams)
Power requirements	Handset: 3.6V 300mAh Ni-Cd battery
	Telephone base: 7.5V AC @ 200mA

Memory	Handset directory: 10 memory locations (9 speed dial inclusive);
	up to 24 digits and 14 characters
	Handset call log: 30 memory locations; up to 11 digits and 15 characters

	www.vtechphones.com	49

Appendix

Image 53

VTech CS2111-11, CS2112 user manual Technical specifications

Contents

User’s manual Congratulations Table of contents Iii Handset Power adapter Cover Parts checklistBattery Telephone base Telephone base DSL filter not included for DSL users Telephone line cord Telephone base installation Battery installation and charging Wall mounting Press to scroll up while in programming mode Press to scroll down while in programming modeHandset layout Press to store a programming option or a directory entry Press to page the handset Telephone base layout Date and time Event of a power failure, the time may need to be reset Ringer Ringer volume Home area code Dial mode Language Clear voicemail Make calls VolumeAnswer calls End calls Temporary tone dialing Call waiting Find handset Redial Store a directory entry Directory Character chart Review the directory Edit a directory entry Delete a directory entry Dial a number from the directory Copy a directory entry into speed dial Store a speed dial entry Speed dial Cursor appears at the end of the name. Use the dial pad Edit a speed dial entry Dial a speed dial number Delete a speed dial entry Reassign speed dial locations About caller ID Call log Make a call log entry ready to dial Review the call log Dial a call log number Save a call log entry to the directory Delete an entry Delete from the call log Caller is blocking the name and number information Call log display screen messagesCaller is blocking the telephone number information Handset display screen messages Battery Important safety instructions My telephone does not TroubleshootingWork at all Handset to the telephone base after use Telephone base for 16 hours Telephone company Telephone base and charge for 16 hoursNot accept charge Place Incoming call Cannot dial out First, try all the above suggestions See Dial mode on page 9 to set the dial type My calls cut in and out When I am usingApart from each other, or use a different surge protector Charges may apply Keys or buttons work Using the telephoneHear other calls when System does not ID serviceReceive caller ID, or Company Caller ID during call To dial Caller ID entries do notNumbers before dialing or saving the telephone number My cordless handset Common cure for Operating range Maintenance About cordless telephones Warranty How do you get warranty service? FCC Part FCC, Acta and IC regulations Rbrc seal Technical specifications Index Appendix 91-001545-050-100