Hear other calls when, Using the telephone | VTech CS2112 guide

Troubleshooting

Problem	Suggestion

I hear other calls when	• Disconnect the telephone base from the telephone jack. Plug in a different telephone. If there are still
using the telephone.	other calls, the problem is probably in the wiring or local service. Call your local telephone company.
	• Press CHAN/DELETE to switch to a clearer channel when on a call.

I hear noise in the	• Make sure the telephone line cord is plugged in securely.
handset, and none of the	• Remove and re-insert the battery.
keys or buttons work.

40	www.vtechphones.com

Image 44

VTech CS2112, CS2111-11 user manual Hear other calls when, Using the telephone, Keys or buttons work

Contents

User’s manual Congratulations Table of contents Iii Parts checklist Handset Power adapter CoverBattery Telephone base Telephone base Telephone base installation DSL filter not included for DSL users Telephone line cord Battery installation and charging Wall mounting Press to scroll down while in programming mode Press to scroll up while in programming modeHandset layout Press to store a programming option or a directory entry Telephone base layout Press to page the handset Event of a power failure, the time may need to be reset Date and time Ringer volume Ringer Dial mode Home area code Language Clear voicemail Volume Make callsAnswer calls End calls Call waiting Temporary tone dialing Redial Find handset Directory Store a directory entry Character chart Review the directory Edit a directory entry Delete a directory entry Copy a directory entry into speed dial Dial a number from the directory Speed dial Store a speed dial entry Edit a speed dial entry Cursor appears at the end of the name. Use the dial pad Delete a speed dial entry Dial a speed dial number Reassign speed dial locations About caller ID Call log Review the call log Make a call log entry ready to dial Dial a call log number Save a call log entry to the directory Delete from the call log Delete an entry Caller is blocking the name and number information Call log display screen messagesCaller is blocking the telephone number information Handset display screen messages Battery Important safety instructions Troubleshooting My telephone does notWork at all Handset to the telephone base after use Telephone base for 16 hours Telephone company Telephone base and charge for 16 hoursNot accept charge Incoming call Place See Dial mode on page 9 to set the dial type Cannot dial out First, try all the above suggestions When I am using My calls cut in and outApart from each other, or use a different surge protector Charges may apply Keys or buttons work Using the telephoneHear other calls when ID service System does notReceive caller ID, or Company Caller ID during call Caller ID entries do not To dialNumbers before dialing or saving the telephone number My cordless handset Common cure for Maintenance Operating range Warranty About cordless telephones How do you get warranty service? FCC, Acta and IC regulations FCC Part Rbrc seal Technical specifications Index Appendix 91-001545-050-100