Xerox 701P21091 Margin Djde options and definitions, Margin Djde points to note, Modify Djde

Using Dynamic Job Descriptor Entries (DJDEs)

Options

		Table 5-44. MARGIN DJDE options and definitions
Option	Definition
value	Specifies the distance from the left edge of the logical page (as indicated by the
	BEGIN value currently in effect) to the left margin. Has the format nnn.mm (a
	positive decimal number with up to 2 digits to the right of the decimal point).
valuetype	Unit of measure for the margin value. Available unit options are:
	•	IN (inches)
	•	CM (centimeters)
	•	POS (character positions)
	The default value type is POS.

MARGIN DJDE: points to note

• A value must be specified as an integer (nnn), if its valuetype is character positions (POS).

• The options for the MARGINS DJDE are the same as for the LINE MARGIN command.

MODIFY DJDE

Specifies a copy modification entry (CME) to be used in report processing.

Type Page oriented

Syntax MODIFY = {(cmeid [, init [, copies]]) NONE}

or

MODIFY = cmeid

Options

	Table 5-45. MODIFY DJDE options and definitions
Option	Definition
cmeid	copy modification entry identifier
	References a previously created CME file (filename.cme).
	The default is NONE.
init	initial copy
	Specifies the first copy of the report to which the CME will be applied.
	If init is not specified, the CME is applied to all copies.

5-54 Using LCDS Print Description Language