Xerox 701P21091 manual Options 73. Output Sizing parameter options and definitions, Semiauto, Best

Specifying print format parameters

Options

Table 4-73. OUTPUT SIZING parameter options and definitions

Option	Definition
SEMIAUTO	(Standard mode of operation.) Causes the printer to stop printing when
	there is a paper size mismatch.
	For the printer to resume printing, the operator must do one of the
	following:
	• Resume printing to print the job on the next larger size paper.
	• Change the paper or the effective stock.
	•	Cancel the job.
	If Continue is selected, the system ignores further mismatches of this type
	until one of the following occurs:
	• The STOCKS parameter changes.
	• The end of the report is detected, and no STOCKS parameter is in
		effect.
	• The end of the print job is reached.
	• The printer stops printing.
STOP	Causes the printer to cycle down if the exact paper size is not available. To
	resume operation, the operator must do one of the following:
	• Load the proper size paper and resume printing.
	•	Cancel the report.
BEST	On the DP EPS, this parameter functions the same as SEMIAUTO.
EXACT	On the DP EPS, this parameter functions the same as STOP.

Default

OUTPUT SIZING parameter: points to note

SEMIAUTO

•A paper size is considered equal in size to another paper size if neither dimension differs by more than 15/600 of an inch.

•Use this command to print on paper larger than the specified paper size. Data may be lost if the paper size is smaller than the image size.

•Note that A4 paper is treated as smaller than 8.5 by 11 inch paper because it is narrower.

•Regardless of the parameter selected, if an exact match in paper size is found, the matching tray is used. The parameters differ only when no match is found.

4-78 Using LCDS Print Description Language