Xerox 701P21091 manual Options 55. Tcode Treset parameter options and definitions

Specifying input parameters

Options

Table 2-55. TCODE TRESET parameter options and definitions

Option	Definition
typespec	A typespec may be coded as a single integer, n, within the range of 1 through 7.
	NUMERIC may be used instead of 1; ALPHA may be used instead of 2.
inputspec	An inputspec for this parameter is the same as defined for TASSIGN
	parameter, or it can be ALL, which specifies that all characters in the code table
	are disassociated from the specified types. The TRESET parameter may be
	specified more than once in the TCODE command.
ALL	Resets all types for all characters.
Default		No default
		TCODE command examples
		Following are a few examples of how to use the TCODE
		command.

Example 1 The basic character set used for default types is ASCII. The keyboard display has uppercase and lowercase character capability:

T1: TCODE	DEFAULT=	ASCII,
	TASSIGN=(3,(A'A',-,A'Z')),
	TASSIGN=	(4,(A'a',–,A'z'));

Example 2 The basic character set used for default types is EBCDIC. The keyboard display has uppercase and lowercase character capability:

T2: TCODE DEFAULT= EBCDIC,

TASSIGN= (3,('A',–,'I'),'J',–,'R'), ('S',–,'Z')), TASSIGN= (4,'a',–,'i'),('j',–,'r'),('s',–,'z'));

Example 3 The basic character set used for default types is ASCII. The

keyboard display is limited to uppercase only.

T3: TCODE DEFAULT= ASCII,

TASSIGN=(3,(A'A',–,A'Z')),

TASSIGN= (4,(A'#A',–,A'#Z'));

The # symbol functions as a case switching operator.

Using LCDS Print Description Language 2-53