Xerox 701P21091 manual Record oriented DJDEs, Assign, File, Lpi, Overprint

Using Dynamic Job Descriptor Entries (DJDEs)

Record oriented Record oriented DJDEs take effect immediately at the next DJDEs record following the last record of the packet (set) of DJDE records of which they are a part. After an END parameter, a

compiled record oriented DJDE takes effect immediately.

NOTE: The exception is the OVERPRINT DJDE, which takes effect at the next logical page boundary if FONTINDEX has been invoked in a JDE or DJDE.

Record oriented DJDEs also may appear at report boundaries to change subsequent pages in a report (or report copy).

	Table 5-5. Record oriented DJDEs
DJDE	Function
ASSIGN	Assigns a VFU channel to one or more line numbers on the logical page.
BOF	Specifies the Bottom of Form (BOF) line number.
C (text)	Allows comment text in the DJDE record.
DATA	Specifies the location and length of printable data within an input record.
END	Specifies the end of DJDE information.
EOF	Stops downloading of a sixel encoded file to the system disk.
FILE	Enables files to load onto the system disk while a print job is in progress.
LOGO	Specifies the name and location of logos that will be printed on pages of a
	report.
LPI	Specifies the line spacing values for each subsequent line.
OVERPRINT	Provides instructions to the system for handling overprint lines (print lines
	whose carriage control specifies printing with no line spacing after the last
	printed line).
TOF	Specifies the Top of Form (TOF) line number.

Using LCDS Print Description Language 5-13