Xerox 701P21091 manual Syntax END END Djde points to note, EOF Djde

Using Dynamic Job Descriptor Entries (DJDEs)

END DJDE

Specifies the end of a DJDE packet. When an END DJDE is encountered, the system applies all DJDE information specified to the current printing environment at the next page or record boundary.

Type Record oriented

Syntax END;

END DJDE: points to note

•After the system detects an END parameter, record oriented DJDEs take effect immediately. Page oriented DJDEs take effect at the current page if no data has been printed. If data has been printed, page oriented DJDEs take effect at the next page transition.

•If a delimiter other than a comma was used before the END DJDE, a syntax error is displayed. A comma is required for the system to properly process the END DJDE.

EOF DJDE

Stops downloading of a sixel-encoded file to the system disk (used in conjunction with the FILE DJDE.) Note that EOF is followed by a comma, then a semicolon.

Type Record oriented

Syntax EOF,;

EOF DJDE: point to note

When the EOF DJDE is combined with the FILE DJDE, the END

DJDE is not required.

5-26 Using LCDS Print Description Language