Xerox 701P21091 manual Summary of Dbcode command parameters, Dbcode Assign

Specifying input parameters

ac identifier A command identifier of the type ac is optional for the first DBCODE command within a JDE. Thereafter, each additional DBCODE command must include the identifier. The ac identifier consists of 1 to 6 alphanumeric characters (A through Z and 0 through 9). One of the characters must be alphabetic.

DBCODE command parameters

The following table summarizes the DBCODE command parameters.

Table 2-19. Summary of DBCODE command parameters

Parameter	Specifies	Online	Offline	DJDE
DBCODE ASSIGN	Defines user double-byte code assignments.	Y	N	N
DBCODE DEFAULT	Specifies a base code from which double-byte	Y	N	N
	character code assignment exceptions can be
	made.

The following sections describe the syntax of the DBCODE command parameters and explain the parameter options.

DBCODE ASSIGN

Defines double-byte character code assignment exceptions or an entire user character translation table.

Syntax ac: DBCODE ASSIGN = {(input, output) (input, (output1 [,

output2] [,...])}

Options

Table 2-20. DBCODE ASSIGN parameter options and definitions

Option	Definition
input	A numeric constant that defines the input double-byte code.
output	A numeric constant that defines the output double-byte code that corresponds
	to the input code
Default	No default

Using LCDS Print Description Language 2-23