Xerox 701P21091 manual Summary of Roffset command parameters, Roffset Passes, Default ALL

Using logical processing

ROFFSET can also force an offset on either all copies of the report or only the first copy. In conjunction with job offset control (OFFSET parameter of the OUTPUT command), you can exert extensive control over the offsetting function to build tailored, job controlled stacks of output in your printer stacker tray.

ROFFSET command parameters

The following table summarizes the ROFFSET command parameters.

Table 3-29. Summary of ROFFSET command parameters

Parameter	Specifies	Online	Offline	DJDE
ROFFSET PASSES	Initiates an offset of specified copies of a report.	Y	Y	N
ROFFSET TEST	Defines a test expression for offsetting pages in the	Y	Y	N
	stacker.

The following section describes the syntax of the ROFFSET command parameters and explains their options.

ROFFSET PASSES

Specifies which copy of a report in a collated print run will be offset.

Syntax ROFFSET PASSES = {FIRST ALL}

Options

Table 3-30. ROFFSET PASSES parameter options and definitions

Option	Definition
FIRST	Specifies that the satisfied criteria causes an offset only on the first pass of a
	collated print run.
ALL	Specifies that the satisfied criteria causes an offset on all passes of a collated
	print run.

Default ALL

3-40 Using LCDS Print Description Language