Eton E100 owner manual Default Factory System Set Codes

Models: E100

1 41
Download 41 pages 51.33 Kb
Page 22
Image 22
DEFAULT FACTORY SYSTEM SET CODES

E100 OWNER’S MANUAL

8SYSTEM SET CODES AND THE SYSTEM SET CODE TABLE continued

3.Within 5 seconds, enter 12 with the numeric keypad, then immediately press/release the button labeled ENTER. ‘12H’ briefly appears in the display.

DEFAULT FACTORY SYSTEM SET CODES

When shipped from the factory, the radio’s System Set Code Table is set up as follows. Changes can be made via the procedure shown in the section titled CHANGING SYSTEM SET CODES.

Radio alarm uses last station tuned. Code 02.

Eight pages with 25 memories (200 memories total). Code 08.

10 KHz AM (MW) tuning rate. Code 10.

24 hour clock system. Code 24.

1.5 Volt AA batteries. Code 29.

87-108 MHz FM frequency coverage. Code 88.

MONITORING CURRENT SET CODE STATUS

In the System Set Code Table, the current status of the set codes identified with an asterisk (*) can be monitored by performing a

3 second press of the ‘Sys. Set’ button. The applicable icon shows briefly in the display window for each code.

20

Page 22
Image 22
Eton E100 owner manual Default Factory System Set Codes