Eton E100 owner manual WORKING WITH MEMORY continued, Accessing What Is Stored Into Memory

Models: E100

1 41
Download 41 pages 51.33 Kb
Page 17
Image 17
ACCESSING WHAT IS STORED INTO MEMORY

E100 OWNER’S MANUAL

7 WORKING WITH MEMORY continued

Down/Min. buttons (5,6). You will see the memory page change with each press. When the page of your choice is reached, stop pressing.

3.When finished, either press/release the M.Scan/Page button, or wait about 3 seconds, causing the memory page to be entered.

The clock (34) will reappear in the display’s upper right corner.

ACCESSING WHAT IS STORED INTO MEMORY

There are three ways to access what has been stored into memory: Direct Memory Access, Memory Search and Memory Auto-scan. These three methods are described below. When the memory page and memory preset numbers appear in the upper right corner of the display, as it will in the descriptions below, the radio is in MEMORY ACCESS MODE. This mode can be exited any time with a press/re- lease of the M.Scan/Page button (7).

Direct Memory Access

If you are already on the desired memory page, simply key- in the memory number with the numeric keypad. For example, if the desired radio station is in memory number 01, just press ‘0’, then ‘1’, and it will go to memory 01.

If you first need to change memory pages, see the previous section,

SELECTING/CHANGING MEMORY PAGES.

Memory Search

Memory Search enables manual searching through the memories within a memory page, as shown below:

1.Press/release the M.Scan/Page button.

2.Use quick, short presses on the Up/Hour or Down/Min. buttons to search through the memories.

15

Page 17
Image 17
Eton E100 owner manual WORKING WITH MEMORY continued, Accessing What Is Stored Into Memory