Eton E100 owner manual WORKING WITH MEMORY continued, Memory Auto-Scan

E100 OWNER’S MANUAL

7 WORKING WITH MEMORY continued

Memory Auto-Scan

Memory Auto-scan enables scanning through the memories within the selected memory page. Each filled memory is accessed for about 5 seconds, after which the scan move on to the next used memory automatically, staying on it for about 5 seconds. This continues indefinitely on the selected page until deliberately stopped. Unused memories are not accessed.

1.Press/release the M.Scan/Page button.

2.Press/hold either the Up/Hour or Down/Min. button for about 3 seconds. Then release it. Note that the memory number in the upper right corner of the display flashes and the preset being scanned remains for about 5 seconds. It then moves on to the next memory preset for another 5 seconds.

To stop memory preset auto-scan, press/release either the Up/Hour or Down/Min. button.

MOVING A STORED FREQUENCY

If desired, a frequency that has been stored into a memory can be moved to a different memory on the same page, or a different page.

1.Turn on the radio.

2.Press/hold the M.Scan/Page button (7) for about 3 seconds and release it.

3.Use the Up/Hour or Down/Min. button (5,6) to select the required memory page.

4.Press/release the M.Scan/Page button twice.

16