Eton E100 owner manual Clock and Alarm Features, Fine Tuning, Setting the Clock, To set the clock

E100 OWNER’S MANUAL

5 BASIC RADIO OPERATION continued

5.975 MHz), use the method described previously.

1.Press/release the ‘Enter’ (13) button.

2.Enter the frequency using the numeric keypad.

3.Press/release the ‘Enter’ button again.

4.FINE TUNING

The FINE TUNING control (4) is located on the right side of the radio. It tunes in 1 Kilohertz steps in AM and Shortwave and .05 Megahertz steps in FM. Use it to ‘fine-tune’ stations to your liking, or use it as you would a tuning knob.

6 CLOCK AND ALARM FEATURES

SETTING THE CLOCK

The factory has set the clock to function as a 24-hour format clock. If you prefer a 12 hour, AM/PM clock format, see the section titled CHANGING THE CLOCK FROM 24 TO 12 HOUR FORMAT, on page 22.

To set the clock:

1.Turn the radio off. The clock digits appear in the lower part of the display (43).

2.Press/release the button labeled ‘Time Set’ (15). The clock’s digits flash in the display.

3.Within 5 seconds, set the hour using the Up/Hour button and the minutes using the Down/Min. button. Make sure that AM or PM (32) appear in the display, to the left of the time, if your clock is set up in the 12 hr. AM/PM format.

4.Within 5 seconds of finishing, press/release the ‘Time Set’ button

11