Xerox 701P21091 manual Summary of Output command parameters

Specifying print format parameters

OUTPUT command

The OUTPUT command controls the organization and format of a report, including the number of copies of a report, the forms to be printed with the variable data, report offsetting, and the use of simplex or duplex mode. For further information on graphics features, refer to the “Using PDL commands for graphics” chapter.

OUTPUT command parameters

The following table summarizes the OUTPUT command parameters.

Table 4-42. Summary of OUTPUT command parameters

Parameter	Specifies	Online	Offline	DJDE
OUTPUT BFORM	Prints a specified form only on the back sides	Y	Y	Y
	of duplex pages.
OUTPUT BINDING	Specifies page rotation for printing for short	Y	N	N
	edge or long edge binding.
OUTPUT COLLATE	Specifies whether report pages will be	Y	Y	Y
	collated or uncollated.
OUTPUT COPIES	Specifies the number of report copies that will	Y	Y	Y
	be printed.
OUTPUT COVER	Feeds cover pages for a report from the tray	Y	Y	N
	that contains the AUX stock.
OUTPUT CYCLEFORMS	Associates forms with report pages in a	Y	Y	N
	repeating sequence.
OUTPUT DENSITY	Enables or disables image generator local	Y	Y	N
	density functionality. (Listed for compatibility
	purposes; not supported on DP EPS.)
OUTPUT DESTINATION	Specifies the destination for printed output.	Y	Y	Y
OUTPUT DUPLEX	Prints the job on both sides of the paper.	Y	Y	Y
OUTPUT FACEUP	Delivers and stacks the printed sheets face up	Y	Y	N
	in the stacker.
OUTPUT FEED	Specifies the tray from which paper will feed	Y	Y	Y
	for the job.
OUTPUT FORMAT	Specifies a page descriptor entry (PDE) for	Y	Y	Y
	the job.
OUTPUT FORMS	Associates forms with report copies	Y	Y	Y

4-42 Using LCDS Print Description Language