Xerox 701P21091 manual Rstack Delimiter = YES no, Rstack Print = BIN Both Tray None, Main AUX

PDL command quick reference

Table B-2. PDL command quick reference table (Continued)

Command	Syntax	Default
RSTACK	RSTACK ACCTINFO = (offset, length)	—
	RSTACK DELIMITER = {YES NO}	NO
	RSTACK HRPTNA = {(offset, length) NONE}	NONE
	RSTACK PRINT = {BIN BOTH TRAY NONE}	NONE
	RSTACK TEST = testexp	—
RSUSPEND	RSUSPEND BEGIN = {CURRENT NEXT}	NEXT
	RSUSPEND TEST = testexp	—
SAVE (DJDE	SAVE = {(filename [, ...]) ALL}	—
only)
ac:SEFFNT	[label:] SEFFNT SEFMAP = ((font1, font2,),[(fontm, fontn)])	—
	SEFFNT MAP = filename	—
ac:STOCKSET	ac:STOCKSET ASSIGN = {stockdescriptor (stockdescriptor1	—
	[,stockdescriptor2] [, ...])}
	ac:STOCKSET INIFEED = {‘stockname’ stockreference}	first ‘stockname’
	ac:STOCKSET SYSPAGE = {‘stockname’ stockreference	—
	MAIN AUX}
ac:SYSTEM	SYSTEM JDL = JDLname	—
ac:TABLE	ac:TABLE CONSTANT = (sc1 [, sc2] [, ...])	—
	ac:TABLE MASK = (ignore chart ([,charspeci1 [, charspeci2]	—
	[,...]]))
ac:TCODE	ac:TCODE DEFAULT = tcodetype	—
	ac:TCODETASSIGN=(typespec,{’inputspec’1(’inputspec’2	—
	[,...]})
	ac:TCODE TRESET = (typespec, {’inputspec’ (’inputspec’1	—
	[,...]) ALL})
ac:VFU	VFU ASSIGN = {(channo, lineno) channo, lineno [, lineno][,...])}	—
	VFU BOF = value	66
	VFU TOF = value	1

Using LCDS Print Description Language B-9