Xerox 701P21091 manual Cycleforms and Forms parameters Both may be, Output Graphics, Batch

Specifying print format parameters

OUTPUT FORMS	• CYCLEFORMS and FORMS parameters: Both may be
parameter: points	used within a report; however, only the last parameter
to note	specified is in effect at any given time. If a multicopy report
	specifies CYCLEFORMS, a FORMS DJDE that is
	encountered within the report overrides the CYCLEFORMS
	parameter from that point in every copy.
	• You can code forms at a workstation with forms creation
	software such as Elixir, on another laser printing system
	using Xerox Forms Description Language (FDL), or on a
	mainframe computer.
	You can transfer these form files from tape, CD, or diskette to
	the controller disk by using the Import process (for further
	information, click the online [Help] button on your system
	controller and refer to “Importing resources”). You can also
	download forms from a host computer by using File Transfer
	Protocol (FTP) or the FILE DJDE.

OUTPUT FORMS	The example below shows how to specify forms on different
parameter	copies. Form FORM12 appears on copies 1 and 2. FORM3 will
example	print on copy 3, and FORM4, on copies 4 through 10.
	OUTPUT FORMS = (FORM12,1,2), FORMS = FORM3,
	FORMS = FORM4, COPIES = 10;
	OUTPUT GRAPHICS
	Specifies how graphics will be processed in a job.
Syntax	OUTPUT GRAPHICS = {NO YES MOVE BATCH ({NO
	YES MOVE}, NOSUB)}

Options

	Table 4-56. OUTPUT GRAPHICS parameter options and definitions
Option		Definition
NO		Indicates that there are no graphics in this job.
YES		Indicates there are graphics in the job, and they are processed in Batch mode.
BATCH		Means that the input stream contains no text, but only graphics that are to be
		imaged, one per page.

4-56 Using LCDS Print Description Language