Xerox 701P21091 manual Text Editor window

PDL principles and procedures

Figure 1-14. Text Editor window

2.In the Text Editor window, code the JDL name, starting at the left edge of the window workspace.

3.Code the system or JDL level ID commands with their identifiers.

Recommended:

•Before beginning your system level commands, code a comment line stating that the following entries are system level commands.

•For each command, at the beginning of the line, enter the identifier, followed by a colon (:) and the command keyword. Tab or space over until the cursor is approximately 20 character spaces from the left edge of the Text Editor workspace, then enter the first parameter keyword.

•For each subsequent parameter of the system level command, tab or space over about 20 character spaces to enter the parameter, aligning it under the previous parameter.

•Code the VFU (vertical format unit) first.

1-56 Using LCDS Print Description Language