1.Press the button Time functions for approx. 2 seconds. A short acoustic alarm will be heard.
2.Press the buttons Time functions and
“ ” at the same time. A short acoustic alarm will be heard and the time 12:00 appears in the display
When the oven is switched on, the symbol 
appears in the display.
This means that the demo function is activated.
All oven functions can be selected.
The oven is not really working and the heating elements do not switch on.
Switch off the oven and follow the above described procedure to disable the demo mode.
The demo mode remains saved in the programme in the event of a power failure.
Beep on touch
You can choose to make the electronic control beep each time that a button is pressed.
To enable this function, the oven must be off.
1.Press the buttons Oven functions and
“ 
” at the same time and keep them pressed for about 3 seconds. The alarm signal beeps once
To disable the beep on touch:
1.With the oven switched on, press the button 
to switch the oven off.
2.Press Oven functions button and “ 
” at the same time and keep them pressed for about 3 seconds. The electronic control beeps once.
Error codes
The electronic programmer does a continuous diagnostic check of the system. If some parameters are not correct, the control unit will stop the activated functions and it will display the corresponding error code
For further details, refer to chapter “Something not working”.
Use, Tips and Tables
Using the Oven
Warning! Always cook with the oven door closed. Stand back when opening the oven door.
The oven has four shelf levels. The shelf positions are counted from the bottom of the oven as shown in the diagram. It is important that these shelves are correctly positioned as shown in the diagram.
13
