Child lock for the oven
To prevent children from switching on the oven, it is possible to lock the oven controls.
1. Turn off the oven by pressing button 
.
2. Press Oven function and “ “ buttons at the same time for about 3 seconds. An acoustic signal will be emitted and the indication ‘ SAFE ’ will appear in the display
3.The oven is now locked. Neither oven functions nor temperatures can be selected.
To unlock the oven:
Press Oven function and “ ” buttons at the same time and keep them pressed for about 3 seconds.
An acoustic signal will be emitted and the indication “SAFE” will go out.
The oven can now be operated.
Fast heat-up function
After a cooking function and the temperature have been selected, the cavity will gradually heat up until the selected temperature is reached.
This will take from 10 to 15 minutes, depending on the selected function and temperature.
If it is necessary to reach the required temperature in a shorter time, the “Fast Heat Up” function can be used.
1.Switch the oven on by pressing button 
.
2.Set the required cooking function and temperature as explained in the previous pages.
3.Set the temperature by pressing button
“ " or “ 
”. The temperature will appear in the display.
4.Press the button Fast heat up. The temperature display will show “ FHU ”
5.Press the button Oven function. The symbol “ ° ” will flash for approximately 10
seconds. Now it is possible to select the required temperature. To do this, press the button “ ” or “ 
”.
6.When the required temperature is reached, the electronic control beeps for
a short time, and the temperature display reverts to the selected temperature.
This function can be used with any cooking function or temperature.
Demo mode
This mode is intended to be used in shops to demonstrate the oven functionality without any power consumption except the interior light, the display and the fan.
This function can only be switched on when the appliance is first connected.
If there is a power failure, when the power supply is restored again the Demo function can only be switched on if, in the display, 12:00 and the symbol 
are flashing automatically.
12
