3.While the symbol 
is flashing, press the button “ 
” to select the required time. The maximum time is 23 hours 59 minutes. The programmer will wait 3 seconds and then start running.
4.After the time programmed has elapsed, the oven switches off automatically. An acoustic alarm will be heard and “0.00” will appear on the control panel.
5.To switch off the acoustic alarm, press any button.
To cancel the programmed cooking time:
1.Press Time functions button, until the symbol 
flashes.
2. Press the button “ ” to decrease the time until the display shows “0.00”
4.Once the setting has been made, the programmer will wait 3 seconds and then start running.
5.The oven will switch on and off automatically. The end of cooking will be marked by an acoustic alarm.
6.To switch off the acoustic alarm, push ON/OFF button.
To cancel the programme, simply cancel the Cooking Time.
Special functions
Oven safety switch-off
The oven will switch off automatically if any change of setting is made, according to the following table
To programme the oven to switch on and off
1. | Carry out the “Cooking time” setting as | |
| described in the relevant chapter. | |
2. | Push the button Time functions until the | |
| «End of Cooking» function | is selected |
| and the relevant symbol flashes. The | |
Temperature setting:
250ºC
from 200 up to 245°C
from 120 up to 195°C
less than 120°C
the oven will switch off:
after 3 hours
after 5.5 hours
after 8.5 hours
after 12 hours
control panel will display the end of | |
cooking time (that is, the actual time + | |
Cooking time) |
|
3. Push the button “ | ” to select the |
required end of cooking time. | |
Residual heating function
When a cooking time is set, the oven will automatically switch off a few minutes before the end of the programmed time, and use the residual heat to finish your dishes without energy consumption.
All current settings will be displayed until the cooking time is over.
This function will not operate when the cooking time is less than 15 minutes.
11
