Xerox 701P21091 Options Abnormal Error parameter options and definitions, Continue, Abort, Stop

Specifying print format parameters

Options

Table 4-5. ABNORMAL ERROR parameter options and definitions

	Option		Definition
	CONTINUE		Displays the normal system message defining the abnormal condition and
			continues processing the report without applying the offending DJDE
			parameter and without offering the operator the choice of resuming or
			canceling the job.
	ABORT		Displays the message for the abnormal condition and aborts only the
			report it is processing (not the entire job) without offering the operator the
			choice of resuming or canceling the job.
	STOP		Displays the message for stop condition, the system stops processing the
			report and waits for the operator to respond by resuming or canceling the
			job from the Job Manager window.
	Default	STOP
ABNORMAL		• The CONTINUE and ABORT options put the printer in
	ERROR		“Nonstop” mode. The STOP option puts the system in “Stop”
parameter: points			mode. Any abnormal condition that is detected, such as a
	to note		syntax error in a DJDE specification, a missing file referred to
			by a DJDE, or an RTEXT or GRAPHIC error in either mode,
			results in an appropriate error message being displayed. In
			addition, during the Stop mode, the displayed error message
			is followed by a DJDE error message to resume or cancel the
			job.
		• If abnormal conditions are detected while processing DJDEs,
			the DJDE parameter set containing the offending entry is set
			up to print on the OPRINFO page and an error message is
			displayed.
		• Errors detected while system is processing RTEXT data are
			not reported to you.
		• The graphics processing errors are reported separately on
			the graphics exception page printed at the end of the report.

4-4 Using LCDS Print Description Language