Djde operator information pages, Messages on | Xerox 701P21091

Using Dynamic Job Descriptor Entries (DJDEs)

DJDE operator information pages

	The specification OPRINFO=YES in the JDE specifies that the
	DJDE records will be printed and sent to the output bin at the
	next page transition after an END command. The DJDE records
	are printed on a separate page from the report data. However,
	no page formatting occurs and DJDEs in long records are
	truncated at the end of the physical page boundary.
	You can use comments in the DJDE for operator notification or
	output routing instructions in conjunction with the OPRINFO
	parameter. These information pages are printed and delivered to
	the bin regardless of the OPRINFO parameter if the DJDE
	contains an error, unless you disable the information pages on
	the user interface Queue Manager windows.
Messages on	• Error messages. Error messages are printed on the
OPRINFO pages	OPRINFO pages, close to where the errors occurred. These
	messages indicate syntax errors and unsupported DJDEs,
	and give the initial character position of the invalid text string
	or DJDE coding.
	• Missing END command or page boundary. The following
	message is automatically printed on an OPRINFO page at
	the end of a report if the END parameter or a page boundary
	is not detected:

***MISSING END COMMAND OR MISSING PAGE BOUNDARY***

The following conditions produce the message.

–No END parameter is found in the DJDE.

–No complete page boundary was found before the end of the report; that is, at the end of report there were some DJDEs that had not yet been applied.

Duplex processing When the system is printing duplex, the text for OPRINFO pages of OPRINFO pages in printed only on the front side of the sheet. Each OPRINFO

page is processed as duplex page with a blank back. The blank side is counted as a printed sheet by the system in its statistics for the duplex report.

In a job for which OPRINFO was specified, if DJDEs are included at the page boundary of the front side of a duplex page, the DJDE data skips the back side of the sheet and is printed on the front of the next sheet.

Using LCDS Print Description Language

5-5

Image 357

Xerox 701P21091 manual Djde operator information pages, Messages on, Oprinfo pages

Contents

701P21091 Version 3.7 May Xerox DocuPrint EPSPage Table of contents Specifying input parameters Page Page Using logical processing Page Specifying print format parameters Page Using Dynamic Job Descriptor Entries DJDEs Page Format Djde Using PDL commands for graphics Using Lcds Print Description Language Table of contents Xvi Using Lcds Print Description Language Ozone information U. S. only Laser safety Operation safety U. S Electrical supply Operation safety Europe Ventilation Operator accessible areas Maintenance Before cleaning your productCE mark Europe only For further information Introduction Contents Conventions Related publications DocuPrint 100/115/135/155/180 EPS documentationDP 100/115/135/155/180 EPS documents DP 75/90 EPS and 75 MX documents DocuPrint 75/90 EPS documentation Using Lcds Print Description Language Xxvii Introduction Xxviii Using Lcds Print Description Language PDL principles and procedures Enabling PDL features and functions PDL command structure and components Command linesComponents of a command VFU1 ASSIGN= TOF= BOF= CME4 LINE= POSITION= FONT= Set of typical PDL commands VFU1 VFU Keywords Components constants Example Variable referencesValue constants String constants Using the # character case toggle Using a repeat countTypes of string constants Ascii Constant Definition Example Ebcdic Specified, Ebcdic is the default Constant Definition H2 and H6Repeat count examples Syntax rules Command syntaxIncorrect structure for DP EPS Valid structure for DP EPS Criteria CONSTANT=0,120,EQ,T1 Symbol Term Function Command syntax conventionsSyntax conventions Output Sample PDL commands PDL command categories Job Source Library JSL What does a JSL specify? JSL command levels Command level General purpose Command levels and their general purposeOther commands in the JSL can reference them. Commands with Jobs and catalogs within the JSL Sample JSL file format JDL or system level commands Coding system level commands with identifiersJDL name Xsml JDL VFU2 Tables Coding other system level commands Offline Specifying Acct command parameters Job or JDE level commands Catalog level commands Coding job or JDE level commands Examples Comments Ending a JSL What may follow the END command Sample completed JSL Before creating a JSL considerations and decisions Input data Output specifications Special features Paper sizes and page frames Interactions between JSLs, catalogs, and jobs Orientation Vertical and horizontal positions in portrait mode Layout for FMT6 Impact printer format, 8.1 lines per inch Page Fixed pitch and proportional font character Spacing Overriding PDL commands Command override sequence Print Services window with Queue Manager Selected Page PDL principles and procedures Example Sample JSL Hints and tips Smplst JDL VFU Before you start Coding a JSL Workspace and Programs menus Short JSL coding procedure 10. Text Editor window 11. Text Editor Include a File window 12. Save As window Recommended 13. Workspace and Programs menus Full JSL coding procedure 14. Text Editor window Recommended JDE INCLUDE=CATPOW 16. Text Editor Save As window 10. Sample online JSL Sample online JSL CONSTANT=// JOB 11. Sample offline JSL Sample offline JSL LTHFLD=2, FORMAT=BIN, OFFSET=0 Compiling a JSL Compiling procedure 18. Selecting Tools from the Workspace menu 19. Terminal window with % prompt displayed 12. xjdc command options Option Definition= / foldername1 / foldername2 Files produced by the compilation procedure Correcting errors in a JSL 21. Text Editor Open a File window 22. a .LST file for a JSL containing errors Dynamic job descriptor entries DJDEs Benefits of using DJDEs Dumps Online dump format and contentOnline dump Starting and ending online dump sessions 13. Print format command usage for online dump Restrictions for online dumpsField Definition Offline dump format and content Offline dumpStarting and ending tape dump sessions Page 14. Software version compatibility 15. Highlight color commands Command Color parameter Available?Printing highlight color applications on DP EPS Color parameter Available? CommandLogo Number Other Xerox monochrome LPS jobs Points to note for colored forms Input data streams Specifying input parameters Input processing online Input processing functionsPage Downloading resource files from the host to the printer Channel Line Default channel assignments made at installation Online JDL VFU1 Example of an online JSL CONSTANT=’EOJ’ Host computer tape formats Input processing offline Tape codes Packed data formatsRecord formats Record structure Multivolume processing Input processing command descriptions Summary of PDL commands associated with input ProcessingCommand Function Block command parameters Block commandSummary of Block command parameters Parameter Specifies Offline Online Block Adjust DefaultBlock Constant Block Length Block Format Options Block Lmult parameter options and definitions Block LmultBlock Lthfld Options 10. Block Lthfld parameter options and definitions Block Offset Point to noteSyntax Options 11. Block Offset parameter options and definitions Block Postamble parameter points to note Default noBlock Preamble Block Zero Block command example Block command points to note Code command parameters 15. Summary of Code command parametersParameter Specifies Online Offline Code Default Code AssignOptions 16. Code Assign parameter options and definitions Parameter points Options 17. Code Default parameter options and definitionsTo note Parameter Dbcode command Default Code Spacecode parameter point to noteCode Spacecode Spacecode 19. Summary of Dbcode command parameters Dbcode command parametersDbcode Assign Options 20. Dbcode Assign parameter options and definitions Dbcode Default Dbcode command point to noteIden command Default Default Iden DjpccOptions 23. Iden Djpcc options and definitions Options 24. Iden Offset parameter option and definition Iden OffsetIden Oprinfo Options 25. Iden Oprinfo options and definitions Options 26. Iden Prefix parameter options and definitions Iden PrefixOptions 27. Iden Skip parameter options and definitions String constant Kcode command Iden command exampleKcode command parameters 28. Summary of Kcode command parameters Options 30. Kcode Default parameter options and definitions Kcode DefaultKcode Assign Options 29. Kcode Assign parameter options and definitions PCC command Kcode command point to notePCC command parameters 31. Summary of PCC command parameters PCC Advtape Options 32. PCC Advtape parameter options and definitionsPCC Assign Options 33. PCC Assign parameter options and definitions Syntax for ccln definitionSpace print parameters Bottom Of Form actions optional PCC Default Options 34. PCC Default parameter options and definitionsPCC Assign parameter points to note Default TOF PCC InitialOptions 35. PCC Initial parameter options and definitions PCC command example Default X’FF’ PCC command points to notePCC Mask Options 36. PCC Mask parameter options and definitions Record command parameters Record command37. Summary of Record command parameters Record Adjust Options 38. Record Adjust parameter options and definitions Record ConstantFrom 1 to 4 bytes Options DefinitionsOptions 41. Record Length parameter options Definitions Options 42. Record Lmult parameter options and definitions Record LmultRecord Lthfld Options 43. Record Lthfld parameter options and definitions Options 44. Record Offset parameter options and definitions Record OffsetRecord Postamble Record Preamble Record Structure Default Record command Points to noteLTHFLD, OFFSET, FORMAT, and Preamble parameters Constant and Structure parameters Using online JDEs in offline JDLs Record command exampleLine Data parameter and Record Length parameter Record format types Seffnt command 48. Summary of Seffnt command parameters Seffnt command parametersSeffnt Sefmap Options 49. Seffnt Sefmap parameter options and definitions REP Replace Seffnt MAP Options 50. Seffnt MAP parameter options and definitions Seffnt command points to note Seffnt command examples Tcode command General rules for using the Tcode command 52. Summary of Tcode command parameters Tcode command parameters51. Specifying various types of character sets Type Interpretation Options 53. Tcode Default parameter options and definitions Tcode DefaultDefault Tcode Default parameter points to note Tcode Tassign Options 54. Tcode Tassign parameter options and definitions Tcode Treset Options 55. Tcode Treset parameter options and definitions Tcode command examplesResets all types for all characters Volume command Volume command parameters56. Summary of Volume command parameters Volume Kcode Volume KanjiVolume Label Volume Lcode Options 57. Volume Bmult parameter options and definitions Volume BmultVolume Code Options 58. Volume Code parameter options and definitions Default Volume Code parameter points to note Volume DbcodeOptions 59. Volume Dbcode parameter options and definitions Volume Emtype Options 60. Volume Dbcs parameter options and definitionsOptions 61. Volume Emtype parameter options and definitions Volume EOV Volume Expage Options 62. Volume EOV parameter options and definitions Default YES Options 63. Volume Expage parameter options and definitionsVolume Host Options 64. Volume Host parameter options Definitions Double-byte printing Default Volume Host parameter points to note Options 65. Volume Kanji parameter options and definitions Volume Kanji Options 66. Volume Kcode parameter options and definitions Volume KcodeOptions 67. Volume Label parameter options and definitions SPR Honeywell 2000 System Print Tape Options 68. Volume Lcode parameter options and definitions Volume LcodeDefault Ebcdic Volume Lpack Volume Maxlab Options 69. Volume Lpack parameter options and definitionsVolume Minlab 70. Maxlab parameter options and definitions Volume Optimize Options 71. Volume Minlab parameter options and definitionsVolume Optimize Options 73. Volume Oschn parameter options and definitions Volume OschnVolume Oshdp Options 74. Volume Oshdp parameter options Definitions Volume Rmult Options 75. Volume Ostlp parameter options DefinitionsOptions 76. Volume Rmult parameter options and definitions Volume Tcode Volume Unpack Options 77. Volume Tcode parameter options and definitionsOptions 78. Volume Unpack parameter options and definitions Default None Options 79. Volume Vcode parameter options and definitions Volume Vcode80. Character Type code options Type Thousands separator Decimal point 81. Unique character code types Volume command examplesOnline Type Characters Offline Types of commands for logical processing Using logical processing Coding a test expression Test expressions Command-keyword TabidCriid Commands that define criteria and constants Logical processing commands that have Test parametersTable command Summary of Table command parameters Table command parametersTable Constant Options Table Constant parameter options and definitions Options Table Mask parameter options and definitions Table Mask Table command examples Table command points to note Character Type Meaning Mask associations of character to type for the Table Command Criteria command Criteria command modesCharacter to type associations Using the Criteria command String comparisons Using logical processing Commands that specify string comparisons Masked comparisons using nondefault type assignments Criteria command parameters Summary of Criteria command parametersCriteria Change Not done and the test fails Options Criteria Change parameter options and definitions Criteria Change parameter syntax example SyntaxCriteria Constant Options Criteria Constant parameter options and definitions Constant parameter syntax example SyntaxCriteria Linenum Criteria Value Initial lineCount Tabid Table identifier Page Example Parameter syntax Logical processing command descriptions Banner commandCommand Specifies Banner command parameters 13. Summary of Banner command parametersBanner Hcount Banner Hjobno Options 14. Banner Hcount parameter options and definitionsOptions 15. Banner Hjobno parameter options and definitions Banner Hrptna Banner Tcount Options 16. Banner Hrptna parameter options and definitionsOption 17. Banner Tcount parameter option and definition Banner Test Options 18. Banner Test parameter options and definitions Default BannerOptions 19. Banner Type parameter options and definitions Data Banner command examples Banner command points to noteCondition Parameter Result Tcount = Bselect and Bdelete Test parameter Bselect and Bdelete commands 21. Test parameter options and definitions Bselect and Bdelete commands points to note Sample Bselect and Bdelete command Usage Example Lmodify command parameters Lmodify command22. Summary of Lmodify command parameters Lmodify INK Lmodify Test Lmodify SelectOptions 25. Lmodify Test parameter options and definitions Line Raux command Points to note Lmodify command Raux command example Raux command points to noteRaux Test parameter Options 26. Raux Test parameter options and definitions Rselect and Rdelete Test parameter Rdelete and Rselect commands Rdelete command example Rdelete and Rselect commands point to note Rfeed Test parameter Rfeed command Options 28. Rfeed Test parameter options and definitions Rfeed command points to noteTestexp Stock Roffset command 29. Summary of Roffset command parameters Roffset command parametersDefault ALL Roffset Passes Roffset command points to note Roffset TestOptions 31. Roffset Test parameter options and definitions Diagram of a sample Roffset command Roffset command example Rpage command parameters Rpage command32. Summary of Rpage command parameters Rpage Side Options 33. Rpage Side parameter options and definitions Default TOP Options 35. Rpage When parameter options and definitionsRpage Test Options 34. Rpage Test parameter options and definitions Rpage command examples Rpage command points to note Effects of Rpage Side parameter Effects of Rpage When parameter Rsuspend and Rresume command parameters Rresume and Rsuspend commands36. Summary of Rsuspend and Rresume command parameters Rsuspend and Rresume Begin Rsuspend and Rresume Test Rresume and Rsuspend commands points to noteCurrent Next Interaction with Rstack Records that will not be printed Data that will be printed Rsuspend and Rresume example Rstack delimiter modes Rstack command Status display Delimiter on accounting Rstack command parameters 39. Summary of Rstack command parametersRstack Acctinfo Rstack Hrptna Rstack Delimiter Options 42. Rstack Hrptna parameter options and definitions Default Rstack Print parameter points to noteRstack Print Options 43. Rstack Print parameter options and definitions Default No default Rstack command points to note Either Change mode or Constant mode criteriaRstack Test Points to note for online printing Following is an example of the Rstack command Rstack command example Sample Rstack command usage illustration Summary of print format commands Print format command descriptions Abnormal command parameters Abnormal commandSummary of Abnormal command parameters Abnormal Acctfeed Abnormal Code Abnormal Error Abnormal Options Abnormal Error parameter options and definitionsContinue Abort Abnormal Imismatch Default Stop Abnormal Isubstitute Default ANYOptions Abnormal Isubstitute parameter options Definitions Abnormal Otext Options Abnormal Otext parameter options and definitions Default Abnormal Otext parameter exampleAbnormal REP Options Abnormal REP parameter options and definitions Abnormal Security SecurityJDL Acct command parameters Acct command11. Summary of Acct command parameter Acct Dept Acct command example Default BIN Acct command points to noteAcct User Options 13. Acct User parameter options and definitions CME command 14. Summary of the CME command parameters CME command parameters Options 15. CME Constant parameter options and definitions CME ConstantCME Font Option 16. CME Font parameter option and definition CME INK Option 17. CME INK parameter option and definitionInkindex Options 18. CME Line parameter options and definitions CME Line Default CME command points to note CME PositionOptions 19. CME Position parameter option and definition Copy sensitive CMEs Position CME command examples IDR command 20. Summary of IDR command parameters IDR command parametersIDR Icatalog Options 21. IDR Icatalog parameter options and definitions IDR Ilist Default IDR Ilist parameter points to noteOptions 22. IDR Ilist parameter options and definitions ’inkname ’ Line command parameters Line command24. Summary of Line command parameters IDR Palette Line Baseline Default Nospace Options 25. Line Baseline parameter options and definitionsLine Blanktype Line Data Default ProcessOptions 27. Line Data parameter options and definitions Line FCB Default offset Line FdataOptions 29. Line Fdata parameter options and definitions Specifies that there is no font index Line Fontindex Line Gdata Line Fontindex parameter points to note Line Inkindex Options 31. Line Gdata parameter options and definitionsOptions 32. Line Inkindex parameter options and definitions Specifies that there is no ink index Parameter Default unit is LPILine LPI Options 33. Line LPI parameter options and definitions Line Margin Default Line LPI parameter points to note Syntax Options34. Line Margin parameter options and definitions Parameter point Lines is always printed on the accounting Default Line Overprint parameter points to note Options 36. Line PCC parameter options and definitions Line PCC Options 37. Line Pcctype parameter options and definitions Line Pcctype Line VFU 38. Line VFU parameter options and definitionsControl of Print and Space Line command points to note Diagram of a sample print data offset pdo Parameter Line command examples Sample data record structure Message command 39. Summary of Message command parameters Message command parametersMessage Itext Options 40. Message Itext parameter options and definitions Message Otext Options 41. Message Otext parameter options and definitionsEND Message command example Message command points to note Output command Output command parameters42. Summary of Output command parameters Output Graphics Output IdfaultOutput IDR Output Image Output Bform 43. Bform parameter options and definitionsData 43. Bform parameter options and definitions Default LongOutput Binding Long Specifying print format parameters Specifying print format parameters Output Collate Output CopiesOptions 46. Output Copies parameter options and definitions Output Cover Options 47. Output Cover parameter options and definitionsOutput Cycleforms Parameter Example CycleformsFormid Inkref Output Destination Output DensityFIX Nofix Output Duplex Default BINOptions 51. Output Duplex parameter options and definitions Parameter point To note Output Feed Options 52. Output Faceup parameter options DefinitionsOptions 53. Output Feed parameter options and definitions ‘stockname’ Default FMT1 Output FormatOptions 54. Output Format parameter options and definitions Options 55. Output Forms parameter options and definitions Output Forms Cycleforms and Forms parameters Both may be Output GraphicsBatch Output Idfault Default Output Graphics parameter points to noteOutput Graphics parameter examples Move Output IDR Options 58. Output IDR parameter options and definitions‘inkref ’’ Ink reference Options 59. Output Image parameter options and definitions Output Image Options 60. Output Invert parameter options Definitions Output Invert 60. Output Invert parameter options Definitions Default Output Iresult parameter points to noteOutput Iresult Black 62. Output Logo parameter options and definitions Output LogoXdots 600 dpi dots Logo Output Modify Options 63. Output Modify parameter options and definitionsSpecifies that data are processed without modification Options 64. Output NTO1 parameter options and definitions Output NTO1 Default no Options 65. Output Number parameter options and definitions Output Number Output Offset Number character string is placed on the page atOutput Offset = ALL First None Options 66. Output Offset parameter options Definitions Where ostkspec is Output Ostk67. Output Ostk parameter options and definitions Defaults Output Ostk parameter points to note When using tabs and ordered stock67. Output Ostk parameter options and definitions Page FEED=tab stock Page What to do Default Output Papersize parameter points to noteOutput Papersize Uslegal Output Purge Output Papersize parameter example Output SF1FUNCTION Options 69. Output Purge parameter options and definitions Output Shift Output SF2FUNCTION Options 72. Output Shift parameter options and definitions Options 73. Output Sizing parameter options and definitions Default Output Sizing parameter points to noteSemiauto Best Options 74. Output Staple parameter options and definitions Output Staple Output Stocks Options 75. Output Stocks parameter options and definitionsStocksetname Options 76. Output Sysppr parameter options Definitions Output Sysppr Sysppr and the Stockset Syspage parameter Inches is the default widthunit Default Output Tmode parameter points to noteOutput Tmode Options 77. Output Tmode parameter options and definitions Pitch Dots Xdots PPM Pitch modes and throughput performance The printingPage Page Output Trans DP 100/115/135/155/180 EPS only Transparencies cannotOutput Units Output Xshift Options 80. Output Units parameter options and definitionsOptions 81. Output Xshift parameter options and definitions Size Output command examples Output command point to note Illustration of ways to use Output Offset Parameter Example Standard PDEs Default 82. Standard print formats PDEsLines Char No. Per Approx Size PDE command parameters 83. Summary of PDE command parametersPDE Begin PDE Begin Options 84. PDE Begin parameter options and definitions Bform Copies Duplex JDE JDL Otext Rtext Options 85. PDE Fonts parameter options and definitions PDE Fonts PDE Pmode Options 86. PDE Pmode parameter options and definitionsLandscape PDE command examples PDE command points to note Route command parameters Route command87. Summary of Route command parameters Route Rform Options 88. Route Rform parameter options and definitions Route RformRoute Rtext Formid Form identifier Command. Refer to the fontindex option in this table Options 89. Route Rtext parameter options and definitionsSpecifies that the text applies to all copies 102 Using Lcds Print Description Language Stockset command Route command example Stockset command parameters 90. Summary of Stockset command parametersStockset Assign Stockset Syspage Stockset Inifeed Paper size mismatch on system pages Pages generated StocksetSyspage Example of mismatch handling Bills Stockset Assign = F1302, Cover Stockset command example VFU command parameters VFU command94. Summary of VFU command parameters VFU Assign Options 95. VFU Assign parameter options and definitions 96. VFU BOF parameter options and definitionsVFU TOF 97. VFU TOF parameter options and definitions To note to VFU command points to note VFU command example Page Using the Iden command to enable DJDEs Using Dynamic Job Descriptor Entries DJDEs Specifying Djde records Application of DJDEs Single record Djde diagram and Iden command Djde operator information pages Missing END command or page boundary. The followingMessages on Oprinfo pages Restrictions on job parameter modification Command ParametersParameters that cannot be changed through a JDE Djde Parameters that are changeable by a JDE Djde Parameters that can be changed through a JDE DjdeAbnormal Acct Rdelete Record Length Rfeed Roffset Solution Considerations and cautions for using DJDEs JDE JDL DUPLEX=NO Feed Carriage control parameter Processing with Djde Types of DJDEs Accounting log. You can print out the values Oriented DJDEs JDE ItextMAP Margin Assign Record oriented DJDEsFile LPI Djde descriptions Record oriented DJDEs for graphicsAlter Djde Alter Djde point to note Options Alter Djde options and definitionsExamples of Alter Djde UN user defined units Assign Djde options and definitions Assign DjdeAssign Djde points to note Batch Djde Batch Djde points to note Options Batch Djde options and definitionsBegin Djde Start 10. Begin Djde options and definitions Begin Djde points to noteBform Djde Bform Djde points to note Options 11. Bform Djde options and definitionsInit Initial copy References 12. BOF Djde options and definitions BOF Djde Options 14. Cancel Djde options and definitions Cancel DjdeOptions 13. C text Djde options and definitions Text Djde points to note Options 15. Collate Djde options and definitions Collate DjdeCollate Djde point to note Copies Djde Data Djde Copies Djde points to note17. Data Djde options and definitions Data Djde point to note Syntax Dept = sc Options Dept Djde18. Dept Djde options and definitions Dept Djde points to note Destination Djde points to note Options 19. Destination Djde options and definitionsDuplex Djde Options 20. Duplex Djde options and definitions Syntax END END Djde points to note END DjdeEOF Djde Syntax EOF EOF Djde point to note Feed Djde Options 21. Feed Djde options and definitionsFdata Djde 22. Gdata Djde options and definitions File Djde23. File Djde options and definitions 23. File Djde options and definitions File Djde points to noteFile Djde processing Card image file processing LPS labeled file processing Page Fontindex Djde Fontindex Djde points to note 24. Fontindex Djde options and definitions 25. Fonts Djde options and definitions Fonts Djde Fonts Djde points to note 25. Fonts Djde options and definitions Format Djde 26. Format Djde options and definitionsFormat Djde points to note Forms Djde 27. Forms Djde options and definitionsForms Djde point to note Gdata Djde 28. Gdata Djde options and definitionsGraphic Djde 29. Graphic Djde options and definitions Graphic Djde points to note Icatalog Djde Idfault DjdeOptions 30. Icatalog Djde options and definitions Icatalog Djde example IDR Djde 32. IDR Djde options and definitionsIlist Djde Ilist Djde example Options 33. Ilist Djde options and definitionsImage Djde 34. Image Djde options and definitions Inkindex Djde 34. Image Djde options and definitions Invert Djde 35. Inkindex Djde options and definitions Iresult Djde Options 36. Invert Djde options and definitionsOptions 37. Iresult Djde options and definitions Iresult Djde points to note Options 38. Itext Djde options and definitions Itext DjdeItext Djde points to note Syntax JDE = JDEid 39. JDE Djde options and definitions JDE Djde points to noteJDL Djde JDL Djde points to note Logo Djde41. Logo Djde options and definitions 41. Logo Djde options and definitions Logo Djde points to note LPI Djde42. LPI Djde options and definitions LPI Djde point to note 42. LPI Djde options and definitionsMAP Djde Options 43. MAP Djde options and definitions Margin Djde points to note 44. Margin Djde options and definitionsModify Djde 45. Modify Djde options and definitions 45. Modify Djde options and definitions Modify Djde points to noteNumber Djde Number Djde point to note 46. Number Djde options and definitions Using Dynamic Job Descriptor Entries DJDEs Otext Djde Number Djde exampleType Options 47. Otext Djde options and definitions Overprint Djde Otext Djde point to note48. Overprint Djde options and definitions Overprint lines is always printed on the accounting Palette Djde Overprint Djde points to noteOptions 49. Palette Djde options and definitions OptionDefinition Pmode Djde Palette Djde exampleOptions 50. Pmode Djde options and definitions Pmode Djde point to note Rform Djde points to note 51. Rform Djde options and definitionsRtext Djde Specifies that no form will be printed with Rtext pages 52. Rtext Djde options and definitions Rtext Djde exampleSpecifies that no text is to be printed on a separate 53. Save Djde options and definitions Save DjdeSave Djde point to note Sefmap Djde Sefmap Djde points to note Options 54. Sefmap Djde options and definitionsSefmap Djde examples Font1, font2 Options 55. SF1FUNCTION Djde options and definitions SF1FUNCTION Djde SF2FUNCTION Djde Options 56. SF2FUNCTION Djde options and definitionsShift Djde 57. Shift Djde options and definitions Shift Djde points to noteSide Djde Options 58. Side Djde options and definitions Side Djde points to noteOffsetopt Options 59. Stocks Djde options Definitions Stocks DjdeStocks Djde point to note Tmode Djde TOF Djde 60. Tmode Djde options and definitionsSyntax TOF = value Options 61. TOF Djde options and definitions Trans Djde Options 62. Trans Djde options and definitionsTrans Djde points to note Options 63. XMP Djde options and definitions XMP DjdeXshift Djde Report 64. Xshift Djde options and definitions Djde definitions for graphics Output command parameters and functions for graphics Input for graphics Graphic processing modes Error handling for graphics Formats for graphic data Page Graphics features restrictions Random Move modeImpact of graphics on system performance Page Page Contents of command table columns Table A-1. Symbols used in command syntax Table A-2. PDL commands and DJDEs Summary table of PDL commands and DJDEs ‘inkref’’ Name Default Ebcdic Cancel Djde ALLDP EPS Dbcode Assign Default END Djde Position ‘inkref’ Filename AcIDR System default 4850, 4890, DP92C LPS, DP EPS prints Black4850, 4890, DP92C LPS, DP EPS prints Black Jdename All Ucsb Process Density DefaultVFU None LPS, DP EPS Message Itext None Mod & pos =1 Width unit=IN Stockdef First ‘stockname’ Dbcode DP EPS Dbcs Emtype EOV Nopause Code EbcdicNoeof Expage YES DP EPS Host Ibmos Kanji DP EPS Kcode Label Standard Table B-1. Symbols used in command syntax PDL command quick reference Table B-2. PDL command quick reference table PDL command Quick Reference tableCommand Syntax Default Acct User = BIN Tray Both None Alter Djde Block Zero = YES no Bselect File = filename , filetype , f , s , n Only OnlyIden Offset = value JDE = JDEname Only PRINT, Nodisp Line FCB = Ignore ProcessNotran Line Ucsb = Ignore Process Inkref1 , inkref2 Output Feed = stockreference ‘stockname’ Main AUXInkindex1 , inkindex2 Output XMP = Default Report Output Purge = YES no Output Resolution = 300Output Offset = ALL First None Output Papersize = A3 A4 B4 B5 Uslegal AcPDE AcPDE Begin = vpos, hpos 18 IN, .66 Rfeed Test = testexp, stockdef No default for StockdefL0112B Raux Test = testexp Rstack Delimiter = YES no AcTABLE Mask = ignore chart ,charspeci1 , charspeci2Rstack Print = BIN Both Tray None Rsuspend Rsuspend Begin = Current Next Volume Vcode = translation type, keyword Volume Tcode = tcodetype tcodename Character code assignments Honeywell/Bull 200 and 2000 BCD code set IBM BCD code setTable C-1. IBM BCD code set Table C-2. Honeywell/Bull 200 and 2000 BCD code set Fieldata translation Honeywell/Bull 6000 BCD code setTable C-3. Honeywell/Bull 6000 BCD code set Table C-4. Fieldata translation Univac Ascii character set Table C-5. Univac Ascii character setOctal Character Table C-6. Standard Ascii character set Standard Ascii character setMost significant bits Nary Table C-7. Standard Ebcdic character set Standard Ebcdic character set Ebcdic most significant digit Page Figure D-1. Input unpacking examples Input unpacking examples Table D-1. Valid host computer and label specifications Valid host computer and label specificationsLabel specifications Host type Unlabeled Standard System print Host system JDLs on system software CD Label specificationsTable D-2. JDL source files on software CD Host type Unlabeled LPS tape label format IbmrcaOnline Figure D-2. LPS tape format diagram Table D-4. RAD-50 character set Table D-3. Content of tape recordsRAD-50 RAD-50 Character Octal value Decimal value Glossary Page Ascii Page Page Page Program IOT IOMIPD IpfontsPage Page Page Page Page Page Page Page Numerics Symbols INDEX-2 Destination Djde Default ParameterCopies Djde Duplex Djde FCB IBM JSL INDEX-7 PPI PCC Sefmap Djde SEF INDEX-10 INDEX-11 Index INDEX-12