Xerox 701P21091 manual Save As window

PDL principles and procedures

d.Click the file name DFAULT.JSL, then click [OK]. The default JSL is displayed in the Text Editor window.

3.Using the default JSL as a base, enter any changes, additional commands or parameters, and deletions that you need to make in order to construct your new JSL.

NOTE: You should consider carefully the ID name that you enter in the JDL or SYSTEM command (the first line of the JSL), because this identifier determines the name of the JDL file when your new JSL is compiled.

The JDL name must be one to six characters in length, not including the extension (following the dot).

4.When you have completed entering all the desired commands and parameters, select [Save As] from the File menu on the Text Editor window menu bar. The Text Editor – Save As window appears.

Figure 1-12. Save As window

Using LCDS Print Description Language 1-53