Official Makita LB1200F Manual | Cordless Saw Assembly and Safety Instructions

Guide rail

Thumb screws

Dust cover

ASSEMBLY

Changing the band saw blade

CAUTION:

•Contacting the band saw blade even with the band saw blade at standstill may cause a personal injury.

•Saw blade is dangerous.

Be sure to wear gloves when handling saw blade in situations such as removing from packaging, mounting or replacing blade.

1.Loosen the two thumb screws for the right-guide rail, and slide the right-side rail to the right.

2.Open the upper cover and lower cover on the tool.

3. Hold the handle and pull the dust cover upwards to remove.

10

Image 10

Makita LB1200F instruction manual Assembly, Changing the band saw blade

Contents

Band Saw Specifications Safety Instructions Additional Safety Rules for Tool Disconnect toolsPage Instalation Securing the band saw stand How to load dust box Installing the guide rail Lighting up the lamps Switch actionFunctional Description Push stick Reversing the fence Installing the Rip FenceClamping the rip fence Assembly Changing the band saw blade Saw blade Saw housing Upper blade guide Cutting speed adjustment Setting knob for belt tension Tensioning the Band saw Blade Aligning the band saw blade Upper blade guide adjustment Quick release lever Thrust bearing Bolt a Blade Adjusting the guide bearings Adjusting the thrust bearingAlign the lower blade guide Operation Sawing Connecting to vacuum cleanerSaw table tilt Accessories MaintenanceHow to move machine Makita Corporation